Historic & Commercial
B&C Systems International suggest the following products/systems for the Historic & Commercial markets:
AcoustiFlor is a specialised internal acoustic flooring system. It has been designed and developed to achieve high value acoustic performance in multi-level residential and commercial buildings.
AcoustiFlor is used to achieve high value acoustic demands that exceed building code requirements and help create a quiet environment for your building, workplace or family home. AcoustiFlor reduces noise and sound transmission between floors and it can be installed over new or existing floors as an overlay flooring system. AcoustiFlor is exclusively designed for each application and specified by leading architects and designers to comply with regulations and exceed customer expectations.
DekCradle protects deck and roofing membranes. It's made from recycled rubber and safe to use on top of trafficable waterproof membranes and sealed concrete surfaces. It reduces noise transmissions and can be used for both internal and external applications. DekCradle is specified by leading architects and designers to comply with regulations and exceed customer expectations
ErgoFlor is an ergonomic flooring system for internal use particularly in high foot traffic areas such as activity floors, fitness centres, residential and commercial buildings. Commonly used as an overlay floor system in existing buildings where the floor is unsuitable or uneven, ErgoFlor will create a new floor surface where access to services in the future is a requirement and speed of installation is important.
Safe Path Tile is a trafficable 100% recycled rubber tile, 1m x 1m square x 6mm thick used on membrane surfaces to create a safe walking path for access to equipment and devices installed on membrane surfaces. Safe Path Tile is black in colour with yellow edge hazard identificaton, UV stabilised, static resistant, porous, impact absorbant, hard wearing and is an anti skid surface. It is predominantly installed in outdoor applications and can also be used indoors. It is easily cleaned and simple to install.
AT5, AT6, AT12 are non-trafficable acoustic underlay tiles supplies as 1m x 500mm units layed on concrete, timber and membrane surfaces to create an acoustic layer between the concrete or timber floor and the final flooring surface. These products are predominantly used for internal applications. The tiles are simple to install and are available in 5mm, 6mm and 12mm thicknesses depending on your requirements.
ACM550 is an acoustic equipment mounting block, designed specifically for use on membrane surfaces.The ACM550 is installed on top of the membrane surface with approved adhesive and doesnt require mechanical fixing. Typically used as a support device for air conditioning units and most mechanical plant. The ACM550 provides sound and impact absorbtion, is easy to install and is non-invasive on both membrane and applied waterproofing products.
ACM275 compliments the ACM550 as an acoustic equipment mounting block, designed specifically for use on membrane surfaces.The ACM275 is installed on top of the membrane surface with approved adhesive and doesnt require mechanical fixing. Typically used to support services to and from air conditioning units and most mechanical plant such as pipe work, electrical services and conduits. The ACM275 provides sound and impact absorbtion, is easy to install and is non-invasive on both membrane and applied waterproofing products.
Request more info